Antenna is used for multi-rotor, EPP, Racing drone, hollow cup ,airplane ,etc. 3 dbi gain special antenna has stable signal ,strong ability to resist interference , with 15 db amplifier inside , making a longer signal.
I. Pressthe bindingbuttonandconnectpower to receiver.Transmitter in Bind model. LED quick flash , binding completed LED will off. Reconnect power to receiver LED keep lit, now receiver is ready to fly.
II.To set fail-safe throttle and control surface positions, (minimum throttle and all control surfaces set to neutral is suggested).Press and hold the bind button of transmitter (LED will illuminate), Turn on the transmitter.
III. Receiver LED will change from rapid flashing to slow flashing and a few seconds later when bind is accomplished the LED of receiver will illuminate solid.Failsafeshould be programmed correctly .
IV.Restart the receiver by cycling it power off and turn onand connect battery into BIND channel is recommended. All channels should function properly now. You may test fail-safe by holdingsticks in corner, cycle transmitter on and off. Surfaces and throttle should return to your preset fail-safe positions.
• Channel: 20 Channel output
• Modulation: DSM2/DSMX
• Band: 2.4GHz
• Dimensions (W x Lx H):22*15MM
• Weight: 1.3 g
• Voltage Range:3.3V
• Antenna Length Main RX: 15CM , 9CM 6CM
• Remote ControlRange:500M(tested with JR DSX9)
- 1 * REDCON R720X Supermicro DSM2 DSMX Receiver Satellite